e-mailagro@hewea.com
Aluminum gear pump, group 1, 1.5PE2.8D(S)18P0 European type
- Aluminum gear pump for industrial and agricultural applications from Italian company Salami.
Salami aluminum gear pump group 1 with working volume 2.8 - clockwise or counterclockwise direction of rotation (selectable) with European and bevel gear (1:8) shaft: 1.5PE2.8D(S)18P0
BASIC DATA
| Geometric working volume | 2.8 cm3/rev. |
| Maximum working pressure |
250 bar |
| Instantaneous working pressure |
270 bar |
| Direction of rotation¹ | clockwise or counter-clockwise |
| Maximum speed (continuous) | 4500 rpm |
| Minimum speed |
700 rpm |
| Shaft drive | 1:8 taper, M14 x 1.5 |
| Mounting flange | european |
| Typical applications | industry, agriculture |
| Country of origin | Italy |
| Manufacturer's website | www.salami.it |
SUPPLEMENTARY INFORMATION
| Own weight | |
| Temperafront loader oil operation (permissible range) | -15÷85° C |
| Recommended oil viscosity² | 17÷65 cSt |
| Axial length after installation | 82.90 mm |
| Cross section | 87 x 68 mm |
| Connections | (see diagram) |
- The direction of rotation is determined by looking at the pump from shaft. Clockwise direction - clockwise, counterclockwise direction - counterclockwise. Running the pump with the wrong direction of rotation can cause damage to the pump.
- The pump is not suitable for use with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mining Safety.
Note: The technical and operational parameters of the product given above are for information purposes. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below).
To download
Ask a question
Write your opinion