Gear pump, 200FZ0015S0, Hydrocar FZ0 15, left-hand drive, UNI
- Hydrocar external gear pump, type FZ0 15, with a flow rate of 15 l/min (at 1,000 rpm), left-hand direction of rotation¹, with shaft according to UNI 21-222. New version of the 200NFA pump.
NOT SURE WHAT THE DIRECTION OF ROTATION OF YOUR PUMP IS? CHECK HERE
Hydrocar external gear pump, type FZ0 15, with a flow rate of 15 l/min (at 1000 rpm), left-hand direction of rotation¹, with shaft according to UNI 21-222. New version of the 200NFA pump.
BASIC DATA
| Geometric working volume | 15.0 cm3/rev. |
| Flow capacity (at 1000 rpm) | 15.0 l/min |
| Maximum operating pressure (continuous) | 315 bar |
| Direction of rotation¹ | left-hand |
| Maximum speed (continuous) | 2500 rpm |
| Minimum speed | 450 rpm |
| Shaft drive | according to UNI 21-222 |
| Mounting flange | according to UNI 21-222 (3 holes) |
| Typical application | trucks |
| Country of origin | Italy |
| Manufacturer's website | www.hydrocar.com |
SUPPLEMENTARY INFORMATION
| Torque (at maximum pressure) | |
| Own weight | 8.4 kg |
| Temperafront loader oil operation (permissible range) |
-10÷80° C |
| Recommended oilviscosity² | 12÷100 cSt |
| Axial length after installation | 142.5 mm |
| Cross section | 150×120 mm |
| Suction connection | g ¾" female thread (according to BSPP³) |
| Discharge connection | g ½" female thread (according to BSPP³) |
Similar to:
200BPS01100 200BPS01600 200BPS02200 200HPS013D0 200HPS013S0 200HPS016D0 200HPS016S0 200HPS022D0 200HPS022S0 200HPS025D0 200HPS025S0 3.1.2.3.015.X.0.X.0 3.1.2.3.022.X.0.X.0 3.1.2.5.015.X.0.0 3.1.2.5.025.X.0.0.0 3.1.58.016.0.0.0.0 3.1.58.018.0.0.0.0 3.1.58.022.0.0.0.0 22139016 22139020 22139025 10500350166 10500350200 10500300120 10500300139 10500300148 10500300157 10500300175 10500300200 10500300219 10500320126 10500320135 10500320144 10500320153 10500320162 10500320171 10500320206 10500320215 10500320135 10500320251 10500320260 10500320144 10500320153 10500320162 10500320171 10500320206 10500320215 10500320251 10500320260 10500410127 10500410163 10500410207 10500410252 10500420161 10500420205 10500420250 10500440149 10500440167 10500440201 10500440256 10505000178 10505000203 10505000212 10505000258 10505000267 10501100175 10501100184 10501100228 10501100237 ZL20.3
- The direction of rotation is determined by looking at the pump from shaft. Clockwise direction - clockwise, counterclockwise direction- counterclockwise.Running the pump with the wrong direction of rotation can cause damage to the pump.
- The pump is not suitable for use with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mining Safety.
- British Standard Pipe Parallel - British StandardPipe Parallel , inchcylindrical thread , one of the Whitworthpipe threads(BSP) denoted by the letter G.
Note: The technical and operational parameters of the product given above are for informational purposes only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below).