HYDROCAR DIN-slot gear pump with a flow rate of 43l/min (at 1000 rpm), clockwise direction of rotation

Designed to work with power take-off in mobile hydraulics as well as for industrial work.

The reinforced design of the pump gives it adequate strength and durability.

The pump is used in tipping kits, hook and gantry equipment, trailers, roadside aids, auto-rickshaws, basket lifts. HDSs

Advantages of HYDROCAR pumps:

• right-hand rotation;
• 280 bar continuous pressure;
• proven in harsh working conditions.

Warranty: 12m-cycles

• Geometric working volume: 43.0 cm3/rev.
• Flow capacity (at 1000 rpm): 43.0 l/min
• Maximum working pressure (continuous): 280 bar
• Direction of rotation¹: clockwise
• Maximum speed (continuous): 2200 rpm
• Minimum speed: 350 rpm
• Shaft drive: B8×32×36 ISO 14:1982 (DIN 5462)
• Mounting flange: according to ISO 7653:1985
• Typical application: trucks
• Country of origin: Italy
• Manufacturer's website: www.hydrocar.com

SUPPLEMENTARY INFORMATION

• Torque (at maximum pressure):
• Deadweight: 12.4 kg
• Temperafront loader oil operation (permissible range): -10÷80° C
• Recommended oil viscosity²: 12÷100 cSt
• Axial length after installation: 189 mm
• Cross section: 150×120 mm
• Suction connection: internal thread G 1" (according to BSPP²)
• Discharge connection: female thread G ¾" (acc. to BSPP²)

Pumps with other capacities also available - feel free to contact us

Similar to:

200FZL036DS 200FZL036SS 200FZL043DS 200FZL043SS 3.1.2.9.043.X.5.00 3.1.53.036.0.0.0.0 3.1.53.043.0.0.0.0 3.1.53.036.0.0.0.0 3.1.53.043.0.0.0.0 3.1.58.040.0.4.0.0 3.1.7.1.036.X.0.X.0 3.1.7.1.043.X.0.X.0 22149040 22247043 22248043 22677043 22678043 BLGP45BI4HRP 10500330400 10500330419 10500330419 10500340408 10500340417 10502810432 10501110431 10501110441 ZL40.4