Gear pump, LIWA 51, left hand, ISO, 22247051
- LIWA external gear pump, type 51, with a flow rate of 51.70 l/min (at 1,000 rpm), left-hand direction of rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
NOT SURE WHAT THE DIRECTION OF ROTATION OF YOUR PUMP IS? CHECK HERE
LIWA external gear pump, type 51, with a flow rate of 51.70 l/min (at 1,000 rpm), with left-hand direction of rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
BASIC DATA
| Geometric working volume | 51.70 cm3/rev. |
| Flow capacity (at 1000 rpm) | 51.70 l/min |
| Maximum operating pressure (continuous) | 230 bar |
| Direction of rotation¹ | left-hand |
| Maximum speed (continuous) | 2300 rpm |
| Minimum speed (continuous) | |
| Shaft drive |
B8×32×36 ISO 14:1982 (DIN 5462) |
| Mounting flange | according to ISO 7653:1985 |
| Typical application | trucks |
| Country of origin | Front loadercition |
| Manufacturer's website | www.liwahydraulic.com |
SUPPLEMENTARY INFORMATION
| Torque (at maximum pressure) | |
| Own weight | 13.5 kg |
| Temperafront loader oil operating temperature (permissible range) |
|
| Recommended oil viscosity² | |
| Axial length after installation | |
| Cross section | |
| Suction connection | g 1"female thread (according to BSPP³) |
| Discharge connection | g ¾" female thread (according to BSPP³) |
- The direction of rotation is determined by looking at the pump from shaft. Clockwise direction - clockwise, counterclockwise direction - counterclockwise. Running the pump with the wrong direction of rotation can cause damage to the pump.
- The pump is not suitable for use with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mining Safety.
- British Standard Pipe Parallel - British StandardPipe Parallel , inchcylindrical thread , one of the Whitworthpipe threads(BSP) denoted by the letter G.
Note: The technical and operational parameters of the product given above are for informational purposes only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer.
To download
Ask a question
Write your opinion