Multi-piston pump, PZB EOS 108, right-hand drive, ISO
- PZB pivoting axial piston multi-piston pump, type EOS 108, with a flow rate of 107.7 l/min (at 1,000 rpm), with right-hand rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
A hydraulic multi-piston pump is a device whose purpose is to work in hydraulic drives. Multi-piston pumps are devices that are very resistant to high pressures in the system. PZB multi-piston pump, type EOS 108. This model has a flow capacity of 107.7 l/min (at 1000 rpm). The presented pump has a right-hand direction of rotation, with shaft according to ISO 14:1982 (DIN 5462). Please refer to the following tables for detailed technical data. .
BASIC DATA
| Geometric working volume | 107.70 cm3/rev. |
| Flow capacity (at 1000 rpm) | 107.70 l/min |
| Maximum operating pressure (continuous) | 350 bar |
| Direction of rotation¹ | clockwise |
| Maximum speed (continuous) | 1700 rpm |
| Minimum speed |
300 rpm |
| Shaft drive |
B8×32×36 ISO 14:1982 (DIN 5462) |
| Mounting flange | according to ISO 7653:1985 |
| Typical application | |
| Country of origin | Italy |
| Manufacturer's website | www.pzbitaly.com |
SUPPLEMENTARY INFORMATION
| Torque (at maximum pressure) | |
| Own weight | 13.5 kg |
| Temperafront loader oil operation (permissible range) |
-10÷80° C |
| Recommended oil viscosity² | 12÷100 cSt |
| Axial length after installation | 240 mm |
| Cross section | 173×110 mm |
| Suction connection | g 1¼" female thread (according to BSPP³) |
| Discharge connection | g 1" female thread (according to BSPP³) |
- The direction of rotation is determined by looking at the pump from shaft. Clockwise direction - clockwise, counterclockwise direction - counterclockwise. Running the pump with the wrong direction of rotation can cause damage to the pump.
- The pump is not suitable for use with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mining Safety.
- British Standard Pipe Parallel - British StandardPipe Parallel , inchcylindrical thread , one of the Whitworthpipe threads(BSP) denoted by the letter G.
Note: The technical and operational parameters of the product given above are for informational purposes. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below).