Gear pump, 200FZ0043SS, Hydrocar FZ0 65, anticlockwise rotation, ISO
- Gear pump Hydrocar, type FZ0 65, displacement 65,0 cm3/rev. , with anticlockwise rotation¹and flange type - ISO 14:1982 (DIN 5462).
Gear pump Hydrocar, type FZ0 65, displacement 65,0 cm3/rev. , with anticlockwise rotation¹ and flange type - ISO 14:1982 (DIN 5462)..
DETAILS
Displacement | 65,0 cm3/rev. |
Flow rate (at 1000 rev./min) | 65,0 l/min |
Max operating pressure | 220 bar |
Rotation¹ | anticlockwise |
Max continuous speed | 1800 rev./min |
Min intermittent speed |
300 rev./min |
Shaft specification | B8×32×36 ISO 14:1982 (DIN 5462) |
Flange type | ISO 7653:1985 |
Typical applications | trucks |
Country of origin | Italy |
Manufacturer Website | www.hydrocar.com |
ADDITIONAL INFORMATION
Maximum torque absorbed at 350 bar | |
Weight | 13,7 kg |
Fluid temperature |
-10÷80° C |
Recommendet oil viscosity² | 12÷100 cSt |
The axial length | 204 mm |
Cross-section | 150×120 mm |
Inlet | G 1" (by BSPP³) |
Outlet | G ¾" (by BSPP³) |
- Direction of rotation is reconized by looking at the shaft side of the pump. Starting the pump with the wrong direction may lead to damaging the pump
- The pump is not designed to work using oil-water emulsions (HFA, HFB, HFC) and synthetic hydraulic fluids other than oil (HFD) - by the Report of the European Commission Security Mining.
- British Standard Pipe Parallel thread - (BSPP; originally also known as British Standard Pipe Fitting thread/BSPF and British Standard Pipe Mechanical thread/BSPM), which have a constant diameter; denoted by the letter G.
Attention: The above technical parameters of the product are informative. The owner and administrator of an online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are included in the manufacturer's brochure which can be downloaded from the "Download" bar (below).
To download
Ask a question
Write your opinion