Gear pump, PRESKO ZM.112, bi-directional, ISO
tel:882 115 781
e-mailhydraulika@hewea.com
Gear pump, PRESKO ZM.112, bi-directional, ISO
- PRESKO external gear pump, with a flow rate of 112 l/min (at 1000 rpm), with uNIversal direction of rotation¹, with shaft according to ISO 14(DIN 5462)
PRESKO external gear pump, with flow rate of 63 l/min (at 1000 rpm), with uNIversal direction of rotation¹, with shaft according to ISO 14 (DIN 5462)
BASIC DATA
| Material | galvanized steel |
| Connection with thread | external thread G 5/4" (according to BSPP¹) |
| Connection from hose Protection Cover suction side | Φ 38 mm |
| Inclination angle | 90 ° |
| Geometric working volume | 112 cm3/rev. |
| Flow capacity (at 1000 rpm) | 112 l/min |
| Maximum operating pressure (continuous) | 180 bar |
| Direction of rotation¹ | uNIversal |
| Maximum speed (continuous) | 2000 rpm |
| Shaft drive | B8×32×36 ISO 14 (DIN 5462) |
| Typical application | trucks |
SUPPLEMENTARY INFORMATION
| Suction connection | g 5/4" female thread (according to BSPP²) |
| Discharge connection | g 5/4" female thread (according to BSPP²) |
- The direction of rotation is determined by looking at the pump from shaft. Right-hand direction - clockwise, left-hand direction - counterclockwise. Running the pump with the wrong direction of rotation can cause damage to the pump.
- British Standard Pipe Parallel - British StandardPipe Parallel , inchcylindrical thread , one of the Whitworthpipe threads(BSP) denoted by the letter G (according to ISO 228).
Note: The technical and operational parameters of the product given above are not complete data and are for informational purposes only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are provided in the manufacturer's brochure, which can be downloaded from the "Download" tab.
To download
Ask a question
Write your opinion