Gear pump, PZB XP-4D 43, left-handed, ISO
Gear pump, PZB XP-4D 43, left-handed, ISO
- External gear pump PZB, type XP-4D 43, with a flow rate of 43.0 l/min (at 1,000 rpm), left-hand direction of rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
NOT SURE WHAT THE DIRECTION OF ROTATION OF YOUR PUMP IS? CHECK HERE
External gear pump PZB, type XP-4D 43, with a flow rate of 43.0 l/min (at 1000 rpm), with left-hand direction of rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
BASIC DATA
| Geometric working volume | 43.0 cm3/rev. |
| Flow capacity (at 1000 rpm) | 43.0 l/min |
| Maximum operating pressure (continuous) | 280 bar |
| Direction of rotation¹ | left-hand |
| Maximum speed (continuous) | 2500 rpm |
| Minimum speed |
450 rpm |
| Shaft drive |
B8×32×35 ISO 14:1982 (DIN 5462) |
| Mounting flange | according to ISO 7653:1985 |
| Typical application | trucks |
| Country of origin | Italy |
| Manufacturer's website | www.pzbi taly.com |
SUPPLEMENTARY INFORMATION
| Torque (at maximum pressure) | |
| Own weight | 11.5 kg |
| Temperafront loader oil operation (permissible range) |
-10÷80° C |
| Recommended oil viscosity² | 12÷100 cSt |
| Axial length after installation | 187 mm |
| Cross section | 116×? mm |
| Suction connection | g 1" female thread (according to BSPP³) |
| Discharge connection | g 1" female thread (according to BSPP³) |
- The direction of rotation is determined by looking at the pump from shaft. Clockwise direction - clockwise, counterclockwise direction - counterclockwise. Running the pump with the wrong direction of rotation can cause damage to the pump.
- The pump is not suitable for use with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mining Safety.
- British Standard Pipe Parallel - British StandardPipe Parallel , inchcylindrical thread , one of the Whitworthpipe threads(BSP) denoted by the letter G.
Note: The technical and operational parameters of the product given above are for informational purposes. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below).
To download
Brand
Symbol
3.1.7.1.043.1.0.X.0
Ask a question
Write your opinion
Guide