Multi-piston pump, Hydro Leduc PA2 57, ISO
Multi-piston pump, Hydro Leduc PA2 57, ISO
- Hydro Leduc multi-piston pump, type PA2 57, with a flow rate of 57+57 l/min (at 1000 rpm), with uNIwersal direction of rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
Hydro Leduc multi-piston pump , type PA2 57, with a flow rate of 57+57 l/min (at 1000 rpm), with uNIwersal direction of rotation¹, from shaft according to ISO 14:1982 (DIN 5462).
BASIC DATA
| Geometric working volume | 57+57 cm3/rev. |
| Flow capacity (at 1000 rpm) | 57+57 l/min |
| Maximum working pressure (continuous) | 350 bar |
| Direction of rotation¹ | uNIversal |
| Maximum speed (continuous) | 1350 rpm |
| Shaft drive |
B8×32×36 ISO 14:1982 (DIN 5462) |
| Mounting flange | 4×ø13 ISO 7653:1985 |
| Typical applications | trucks |
| Country of origin | France |
| Manufacturer's website | www.hydroleduc.com |
SUPPLEMENTARY INFORMATION
| Torque (at maximum pressure) | 807 Nm |
| Own weight | 23.5 kg |
| Temperafront loader oil operation (permissible range) |
-20÷100 ° C |
| Recommended oil viscosity² | 10÷400 cSt |
| Axial length after installation | 302 mm |
| Suction port | g 2" female thread (acc. to BSPP³) |
| Discharge connection | g ¾" female thread (according to BSPP³) |
- The direction of rotation is determined by looking at the pump from shaft. Clockwise direction - clockwise, counterclockwise direction - counterclockwise. Running the pump with the wrong direction of rotation can cause damage to the pump.
- The pump is not suitable for use with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mining Safety.
- British Standard Pipe Parallel - British StandardPipe Parallel , inchcylindrical thread , one of the Whitworthpipe threads(BSP) denoted by the letter G.
Note: The technical and operational parameters of the product given above are for informational purposes only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer.
To download
Ask a question
Write your opinion