Radio controller 8 channels in hermetic housing with remote control - MULTI CHANNEL
- 868MHz - 12 and 24 V
Radio controller with remote control for use in hydraulics and pneumatics. Used most often for remote control of hydraulic Directional Valvemi and winches.
The control consists of an airtight box (signal receiver) and a remote control (transmitter).
Each set of control has uNIcal serial number programmed at the production stage. The serial number is visible on the remote control and on each receiver.
Radio uNIversal: 12V - 24V.
DATA
| Power supply |
12V - 24V |
| Operating frequency |
868.32 MHz |
| Number of radio channels |
3 |
| Modulation type |
FKS |
| Encoding |
unique serial number |
| Temperafront loader operation |
from -20 to +60 C |
| Operation mode |
monostable |
| Relay tripping time |
30 ms |
| Relay release time |
40 ms |
| Dimensions of the box (mm) |
180 x 150 x 80 |
| Remote control dimensions (mm) |
90 x 150 x 26 |
| Remote control power supply |
2 X 1.5V R03 (AAA) |
The remote control has a protection against accidental pressing. To unlock it, press two buttons from the first row (not including the OFF button) simultaneously for three seconds and let go - the remote control is unlocked and ready for use. When the OFF button is pressed, the remote is locked. The remote control also locks automatically after about 2 minutes of inactivity - that is, from the last time the button was pressed and the transmitting signal was sent.
Pairing the remote control : 1. Turn off the power of the controller, 2. On the locked remote control, press the remote control unlock buttons. 3. While holding the unlock buttons, press the OFF button, 4. After 2 seconds, release the buttons, 5. Turn on the power of the controller - the controller sends its code to the remote control, 6. When the LED on the remote control goes off, the pairing procedure is complete, 7. Unlock the remote control, check the operation.
Note: The technical and operational parameters of the product given above are for information only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data are provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below).